Sony SLV-778HF - Manual (Page 23)

Hookup 5: VCR setup
1 Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 78. If
you made A/V connections
(from page 8), you can skip
this step.
2
Turn on your DSS receiver. ^
3 Press EASY SET UP on the VCR.
O
The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press OK. For details, see page 30.
O The CLOCK SET menu appears. Select AUTO
and press OK. For details, see page 31.
O The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 38.
► ENGLISH
ESPAÑOL
FRANÇAIS
NEXT ; OK
CANCEL : EASY SET UP
SETUP
CLOCK SET
•AUTO MANUAL
SELECT : ◄ /►
NEXT OK
CANCEL : EASY SET UP
SETUP
CABLE BOX CONTROL
► CABLE MOUSE
•ON OFF
BOX CODE NO. —
BOX OUTPUT CH CH3
SELECT ◄/►
CANCEL : EASY SET UP
O
Enter your DSS receiver code number and press
4
' - For details, see page 39.
© Set your DSS receiver
output channel (BOX
■ OUTPUT CH) to LINE
and press OK.
SETUP
CABLE BOX CONTROL
CABLE MOUSE CCiNi,
►BOX CODE NO. -------- ------- *
BOXOUTPUTCH
ENTER YOUR CABLE BOX
CODE NO. USING 0-9 KEYS
REFER TO THE OPERATING
MANUAL FOR THE CODE
SETUP
CABLE BOX CONTROL
CABLE MOUSE «ON OFF
BOX CODE NO. 6&Q
►BOXOUTPUTCH -LINE- _
USE ◄/► TO SELECT CABLE
BOX CH. THEN PUSH OK
SET UP
SET UP IS DONE
Normal display
Getting Started 23