Installing the tv – Sony Bravia KDL- 32ML 13fi User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1. Installing the TV

' The Table-Top Stand for this product is packaged separately (for models KDL-26M3000/KDL-26MLi30/

KDL-37M3000). To install the TV unit to the Table-Top Stand before the connection and setup, refer to the
Table-Top Stand instructions (supplied with the TV set).

(!)
JJ.

,3'

Preventing the TV from Toppling O ver Bundling the Connecting Cables

You can bundle the connecting cables as illustrated
below.

Screw the support belt (supplied) to the TV

stand (not supplied) with a wood screw
(supplied).

Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.

Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.

' Be sure to take measures to prevent the TV from

toppling over and causing injury.

' The supplied wood screw may not be used depending

on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial screws

'/8 to '^/l6 inch (3 to 4 mm) diameter to fit to the TV

stand. Consult your dealer about the types of screw(s).

’ Do not bundle the AC power cord with other

connecting cables.