Sony STR- D915 - Manual (Page 28)

Specifications
(For U.S.A. and Canadian models)
Audio Power Specifications
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 8-ohm load, both channels
driven, from 20 - 20,000 Hz, rated 110
watts (STR-D915) or 100 watts (STR-
D715) per channel minimum RMS
power, with no more than 0.3 % total
harmonic distortion from 250
milliwatts to rated output.
(U.S. A. model only)
other Specifications
Amplifier section
Continuous RMS power output (8 ohnis, at 20 Hz - 20 kHz less than
0.3
% total harmonic distortion) (FRONT)
STR-D915:118W+118W
STR-D715:110W + 110W
Surround mode
Surround mode (8ohms at 1 kHz, THD 0.8 %)
STR-D915 STR-D715
FRONT
lOOW/ch 80W/ch
CENTER»
100 W 80W
REAR 25W 25W
Ovnamic power output
STR-D915: 160 W + 160 W (8 ohms)
225 W + 225 W (4 ohms)
STR-D715: 155 W + 155 W (8 ohms)
220 W + 220 W (4 ohms)
Harmonic distortion at rated output
Less than 0.3 %
Frequency response PHONO: RIAA equalization curve
±0.5 dB
CD, DAT/MD, TAPE MONITOR,
VIDEO 1,2.3»: 10 Hz - 50 kHz .‘¡'dB
♦STR-l»15only
Inputs
Sensitivity Impedance S/NShort ANct/78
IHFANet
PHONO
(MM) 2.5 mV 50 kilohms 75dB/75dB
CD 300 mV 50 kilohms 82dB/82dB
DAT/MD,
TV, LD,
VIDEO 1,2,
3»,TAPE
MONITOR
250 mV 50 kilohms 82dB/82dB
*STR-D915only
Outputs
REC OUT VIDEO 1,2
(AUDIO) OUT Voltage 250 mV
Impedance 10 kilohms
HEADPHONES Accepts low and high impedance
headphones
MUTING
LOW BOOST
TONE -20 dB
+10 dB at 70 Hz
±8 dB at 100 Hz and 10 kHz
* (only in theDOLBY SUR and THEATER modes)
28