Sony STR-DA333ES User Manual
Fm stereo fm-am receiver
This manual is related to the following products:
Table of contents
Document Outline
- Hooking Up the Components 4
- Hooking Up and Setting Up the Speaker System 13
- Location of Parts and Basic Operations 22
- Enjoying Surround Sound 26
- Receiving Broadcasts 37
- Other Operations 41
- Additional Information 45
- Inserting batteries into the remote
- Before you get started
- c
- Notes on antenna hookups
- Required cords
- Jacks for connecting audio components
- Note on audio component hookups
- Required cords
- Jacks for connecting video components
- Note on video component hookups
- c
- Required cords
- Example of LD player connected via-en RF demodulator
- Required cords
- Example of a DVD player hookup using the 5.1 INPUT jacks
- Required cords
- c
- other Hookups
- CONTROL A1 11 hookup
- Brief descriptions of buttons and control used to set up the speaker system
- Required cords
- Terminals for connecting the speakers
- Notes on speaker system hookup
- To avoid short-circuiting the speakers
- Speaker impedance
- Specifying the speaker distances
- 1 Press SET UP repeatedly to display "SPEAKER DISTANCE".
- 2 Press the cursor buttons (♦ or ♦) to select the parameter you want to adjust.
- 4 Repeat steps 2 and 3 until you have set all of the parameters that follow.
- 5 Press SET UP to exit the set up mode.
- 1 Press l/(!) to turn on the receiver.
- 2 Press TEST TONE on the supplied remote.
- 4 Press TEST TONE on the remote again to turn off the test tone.
- 9 You can adjust the volume level of all speakers at the same time
- Before turning on the receiver
- Ciearing the receiver's memory
- Tont Panel Parts Description
- I
- E3 DIMMER button
- ini SOUND FIELD ON/OFF button
- EQUALIZER button
- GENRE button
- MODE button
- M MULTI CHANNEL DECODING indicator
- m 5.1 CH INPUT button
- MEMORY button
- FM MODE button
- TUNING +/- buttons
- PRESET TUNING +/- buttons
- SHIFT button
- FM/AM button
- 133 CURSOR MODE button
- When cursor mode is
- Brief descriptions of buttons used to enjoy surround sound
- c
- c
- o
- c
- To get the most from multi channel surround sound
- Adjusting the surround parameters
- 1 Start playing a program source encoded with muiti channei surround sound.
- 2 Press CURSOR MODE repeatediy until the SUR indicator lights up.
- 3 Press the cursor buttons (♦ or *) to select the parameter you want to adjust.
- 4 Press the cursor buttons (« or *) to select setting you desire. The setting is entered automatically.
- Adjusting the equalizer
- 1 Start playing a program source encoded with multi channel surround sound.
- 2 Press CURSOR MODE repeatedly until the EQ indicator lights up.
- 3 Press the cursor buttons (♦ or ♦) to select the parameter you want to adjust.
- 4 Press the cursor buttons (♦ or ♦) to select setting you desire. The setting is entered automatically.
- Resetting customized sound fields to the factory settings
- Adjustable parameters for each sound field
- Brief descriptions of buttons used to receive broadcasts
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press DIRECT (or D.TUNING).
- 4 Press the numeric buttons to enter the frequency.
- 6 Repeat Steps 2 to 5 to receive another station.
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press TUNING + or TUNING-.
- Presetting radio stations
- 1 Rotate FUNCTION to select the tuner.
- When the receiver reaches either end of the band
- 4 To continue scanning, press TUNING + or TUNING - again.
- 2 Tune in the station that you want to preset using Automatic Tuning (this page).
- 3 Press MEMORY.
- 4 Press SHIFT to select a memory page (A, B or C).
- 5 Select a preset number by pressing PRESET TUNING + or PRESET TUNING -.
- s
- a
- Timing to preset stations
- Brief descriptions of buttons that appear in this chapter
- 1 To index a preset station
- To index a program source
- 2 Tune in the preset station you want to create an index name for.
- 3 Press CURSOR MODE repeatedly until "INDEX" lights up.
- 4 Create an index name by using the cursor buttons:
- To insert a space
- If you've made a mistake
- To assign index names to other stations
- Recording on an audio tape or MiniDisc
- Recording on a video tape
- Setting up the 2 way remote
- To use with the TA-E9000ES
- To use with other components that have the IS logo
- To use with Sony CD players CDP-CX260 or CDP- CX88ES
- 1 Press SET UP repeatedly to display "OTHER SETUP."
- 2 Press the cursor buttons (e or ♦) to select "2 WAY REMOTE."
- 3 Press the cursor buttons (♦ or ♦) to select "ON" or "OFF."
- There's no sound or only a very low>level sound Is heard.
- The left and right sounds are unbalanced or reversed.
- Severe hum or noise is heard.
- No sound is heard from the center speaker.
- Troubleshooting
- Reference sections for clearing the receiver's memory
- Specifications
- FM tuner section
- Video section