Required cords, Jacks for connecting video components, Note on video component hookups – Sony STR-DA333ES User Manual
Page 7: Video component hookups
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Video Component Hookups
Required cords
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Yellow (video)
white (L/audio)
Red (R/audio)
Jacks for connecting video components
Connect a
To the
TV or satellite tuner
TV/SAT jacks
VCR
VIDEO 1 jacks
Additional VCR
VIDEO 2 jacks
DVD or LD player
DVD/LD jacks
TV monitor
MONITOR VIDEO OUT jack
Camcorder or video game
VIDEO 3 INPUT jacks on the
front panel
Note on video component hookups
You can connect your TV's audio output jacks to the
TV/SAT AUDIO IN jacks on the receiver and apply sound
effects to the audio from the TV In this case, do not
connect the TV's video output jack to the TV / SAT VIDEO
IN jack on the receiver. If you are connecting a separate
TV tuner (or satellite tuner), connect both the audio and
video output jacks to the receiver as shown above.
Q
When using the S-video jacks instead of the video jacks
Your monitor must also be connected via an S-video jack. S-video
signals are on a separate bus from the video signals and will not
be output through the video jacks.
0
O
2T
5*
la
c
•o
3
*
n
o
3
•0
0
3A
3