Sony D-E705 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
D-A conversion
1-bit quartz time-axis control
Frequency response
20 - 20,000 Hz -'.dB (measured by EIAJ CP-
307)
Output (at 4.5 V input level)
Headphones (stereo minijack)
15 mW + 15 mW at 16 ohms
Line output (stereo minijack)
Output level 0.7 V rms at 47 kilohms
Recommended load impedance over 10
kilohms
Optical digital output (optical output connector)
Output level; -21 - -15 dBm
Wavelength: 630 - 690 nm at peak level
General
Power requirements
For the area code of the model you purchased,
check the upper left side of the bar code on the
package.
• Two Sony NH-DM2AA Rechargeable
batteries: 2.4 V DC
• Two LR6 (size AA) batteries: 3 V DC
• AC power adaptor (DC IN 4.5 V jack):
U2/CA2/E92 model: 120 V, 60 Hz
CED/CEF/EE1/E13/CN2 model:
220 - 230 V, 50/60 Hz
CEK model: 230 - 240 V, 50 Hz
EA3 model: 110 - 240 V, 50/60 Hz
AU2 model: 240 V, 50 Hz
JE.W/E33 model: 100 - 240 V, 50/60 Hz
HK2 model: 220 V, 50/60 Hz
• Sony DCC-E245 car battery cord for use on
car battery: 4.5 V DC
Dimensions (w/h/d) (without projecting parts
and controls)
D-E700/E705:
Approx. 131.8
X
23.9
x
142.0 mm
(5
'/4 X
%
X
5H
in.)
D-E800/E805:
Approx. 131.8
X
23.7 x 142.0 mm
(5 '/4 X >5/16 X 5 V. in.)
Mass (without rechargeable batteries)
Approx. 210 g (7.4 oz)
Operating temperature
5°C - 35°C (41°F - 95°F)