To stop playback and remove disc, To temporarily interrupt playback, To stop playback – Sony MDP-333 User Manual

Page 14: Cb a, M m ri~i, N~i co co rri r~8~i co f“! rsn rn, O 1=1 s 3, A il3, O a q 3, E3 isd co”m

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CB a

PGM fRAME/nMErCLEARl

□

a O

ABC

m m ri~i

D E F

n~i CO CO
rri r~8~i CO

F“! rsn rn

REPEAT CS

o 1=1

S 3

SHUFFLE MONITOR

a IL3-

REPEAT APAUSEi

O a

Q 3

MULTI SPEED

E3 ISD

co”m

AUTO

CUSTOM

TV,VOEO M

□ CE]

VOLUME CHANNEL

STLL/STEP

rijgi

S 1^ O

ACS/AMS

nai r»»n

STOP PAUSE

Fia. rSR-

O 1

To stop playback and remove disc

Identical buttons on the
main unit can also be used.

To switch between digital and analog sound on an

If the LO contains a digital stereo sound signal, the

player automatically sends that to the output jacks.
Pressing the ANALOG button on the Remote

Commander switches to the analog audio signal and

turns the DIGITAL SOUND indicator off.

Press the ANALOG button again to return to digital

sound output.

With certain discs, there may be a difference in
volume between the digital and the analog sound.

Discs with Label

Discs bearing the I CXI label are recorded with the (CXI

noise reduction system, which gives lower noise levels
and higher dynamic range. The [CS indicator lights up

automatically.

Some

lex]

discs do not include the code necessary to

automatically activate the player’s [CX] noise reduction
system. If the ICX| indicator does not light, press the
ICXI button on the Remote Commander to manually
activate the system.

OPEN/
CLOSE

Remove the disc and press the

OPEN/CLOSE button to close the empty

tray.

To play a stereo LD or a second audio

program (SAP) LD

Press the playback ([>) button, then continue to press the

AUDIO MONITOR button to display the following

information.

Press

AUDIO
ONITQR

Reproduced sound

Indicator

lights

Stereo disc

SAP disc

Stereo

Audio signal 1

(left channel)

Audio signal 2

(right channel)

1/L

2/R

Press ^

Left channel

Audio signal 1

(left channel)

1/L

Press ^ 1

Right channel

Audio signal 2

(right channel)

2/R

To temporarily interrupt playback

When playing CAV discs, the sound is

cut off and a still picture is shown. When

playing other discs, the unit enters the

pause mode. To resume playback from

the same point, press the

I I

or t>

button.

To stop playback

Press the l> button to restart playback

from the beginning of the disc.