Sony KP-41T15 - Manual (Page 35)

Additional Information
trpliblesKboti rig
After trying the methods below, if the problem persists,
contact your nearest Sony dealer.
No picture (screen not lit), no sound
Make sure the power cord is connected
securely.
Check to see if die TV/VIDEO setting is
correct: when watching TV, set to TV, and
when watching video tapes, set to VIDEO.
(page
17)
Make sure the CABLE BOX/TV selector is in
the correct position, (page 16)
Tr)' anotlier channel. It could be station
trouble.
Poor or no picture (screen lit), good sound
^Adjust PICTUICE in the VIDEO menu, (page
20 )
Adjust BRIGEITNESS in the VIDEO menu.
(page 20)
■ »♦ ■ Adjust the convergence, (page 13)
Check antenna /cable connections, (page 6
)
Good picture, no sound
-♦ Press MUTING so tliat ''MUTING"
disappears from the screen, (page 16)
^ Check the MTS setting in the AUDIO menu.
(page 23)
Make sure SPEAKER is set to ON in the
AUDIO menu, (page
24)
No color
—♦ Adjust COLOR m Uae VIDEO menu, (page
20 )
“♦ Confirm that black and white program is not
being broadcast.
Only snow and noise appear on the screen
“♦ Check the C.ABLE setting in the SET UP
menu, (page 14)
“♦ Check till' antenna/cable connections.
(page 6)
“♦ Make sure the channel is broadcasting
pri'crams.
Dotted lines or stripes
“♦ Adjust the antenna.
-♦ Move the TV away from noise sources such
as cars, neon signs, and hair-dryers.
Double images or ghosts
■ ♦ Use a highly directional outdoor antenna or a
cable (when the problem is caused by
reflections from nearby mountains or tall
buildings.)
Cannot operate menu
“♦ If the item you want to choose appears in
black, you cannot select it. Press TV /VIDEO
correctly.
“♦ Check tire CABLE setting in tire SET UP
menu, (page 14)
Cannot receive upper channels (UHF) when
using an antenna
“♦ Check if CABLE is OFF in the SET UP menu,
(page 14)
-♦ Use AUTO PROGRA l M to add receivable
channels that are not presently in the
memoryc (page 15)
Cannot receive any channels when using cable
TV
—♦ Check if CABLE is ON in the SET 'UP menu,
(page 14)
—♦ Use AUTO PROGRAM to add receivable
channels that are not presently in the
memory, (page 15)
Remote commander does not operate
—♦ Battery could be weak. Replace the battery,
(page 11 )
“♦ Make sure the projection TV's power cord Ls
connected securely to wall outlet.
—♦ Set the CABLE BOX/TV .selector to TV when
operating your TV.
-♦ Are fluorescent lights too dose to tire
projection TV? Move lights at least 3-4 feet
away from the projection TV.
Commander's power, channel up/down,
channel buttons do not function
-♦ Set the CABLE BOX/TV selcx:tor to Are
correct position, (page 34)
Cannot gain enough volume when using a
cable box
—♦ Increase the volume at tire cable box. Then .set
tire C.ABLE BOX/T\^ selector to 'W and
adjust the I'V's volunre. (page
34)
Additionaf Information 35 -EN