Sony KP-41T15 - Manual (Page 13)

Make sure the cursor (►) is beside CHANNEL
ERASE/ADD and press RETURN.
If the cursor is not beside CHANNEL ERASE/
ADD, press + A or - V to move the cursor and
press RETURN.
The CHANNEL ERASE/ADD menu appears.
( 3 )
RETURN
SCHANNEL ERASE/ADD
►ERASE
ADD
DMENU
Use : EiH Ex I t Lsy
Erase and/or add the channel you want:
To erase an unwanted channel
(1) Make sure the cursor (► ) is beside ERASE.
(2) Press CH + or - to select the channel you want
to erase.
CH
Selected channel number
SCHANNEL ERASE/ADC
(l
►ERASE ^
ADD
DMENU
S e l e c t 1 h e c h a n n e l _______
U s e i
E x i t
Press REFUICN].
The indication appears beside the channel
number, showing that the channel is added to
the preset memory.
RETURN
5
To erase and/or add other channels, repeat
step 4.
G
When you finish, press MENU.
MENU
Notes
• If you erase or add a VHP or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
• If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
(3) Press RETURN.
The indication appears beside the charmel
number, showing that the channel is erased
from the preset memory.
RETURN
To add a channel that you want
(1) Press + A or - V to select ADD.
(2) Press 0-9 button to select the channel you want
to add and press ENTER.
Selected channel number
© © ©
eCHANNEL
© © ©
ERASE
► ADD
DMENU
© ©
©
eZD
Use i Ellis
Adjusting convergence
(CONVERGENCE)
Tire projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not ha\'c to do this procedure if you execute
AUTO SET' UP (page 11). Do this procudure only
when \'Ou want to adjust it manually.
I Press MENU.
2
Press + A or - V to move the cursor (►) to
SET UP and press RETURN.
Getting Started 13-EN