To turn off the captions or text, Video, Equipment – Sony KP-41T15 User Manual

Page 32: Setting the manufacturer's code, Video equipment

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To turn off the captions or text

Press DISPLAY on the remote commander.
Each time you press DISPLAY, the display changes as
follows:
on-screen information—► XDS*—► Caption Vision or Text

— DISPLAY OFF <<---------- ^

video

equipment

'DISPLAY OFF" goes off after three seconds.

Some programs are broadcast with XDS service which shows a
network name, program name, program length, call letters and

time in show data. When you select XDS with the DISPLAY

button, This information will be displayed on the screen if the
broadcaster offers this ser\'ice.

Note

• Captions may appear with a white box or another error inst' .ni

of a certain word. Poor reception of TV programs can also
cause errors in Closed Caption.

You can operate a piece of video equipment that has an
infrared remote sensor with the supplied remote

commander. Before operating, set the manufacturer's
code number.

Setting the manufacturer's code

0-9 buttons

ENTER

While pressing CODE SET, press 0 - 9 to enter
the manufacturer's code number (see the chart

in the right column) and press ENTER. For

example, to operate a Sony 8 mm VCR, press 0,
2 and ENTER.

CODE SET

ENTER

32'^^ Operations