Sony KP-41T15 - Manual (Page 14)

Press + A or - V to move the cursor (►) to
CONVERGENCE and press RETURN.
The CONVERGENCE adjustment screen appears.
G=Green
B=Blue
Press + A or - V to move the cursor (►) to
the symbol showing the line you want to
adjust, and press RETURN.
QCONVERGENCE
► I RED
-RED
I BLUE
-BLUE
OMENU *
T
Use О Л Ex I
I RED : Red v'erdcal line (left/right adjustment)
—RED : Red horizontal line (up/down adjustment)
I BLUE ; Blue vertical line (left/right adjustment)
—BLUE : Blue horizontal line (up/down adjustment)
5
Press + A or - V to move the line until it
converges with the center green line, and
press RETURN.
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON, the factory setting. If not, set
CABLE to OFF.
You do not have to do this procedure if you execute
AUTO SET UP (page 11). Do this procedure only when
you want to set it manually.
1
Press MENU.
2 Press + A or - V to move the cursor (►) to
SET UP and press RETURN.
3
Press + A or - V to move the cursor (►) to
CABLE and press RETURN.
esET UP
CHANNEL ERASE/ADD
CH CAPTION/GUIDE
VIDEO LABEL
CABLE:
ON
AUTO PROGRAM
LANGUAGE:ENGL ISH
CONVERGENCE
DMENU
Use C Ex I t fcufl
4 Press + A or - V to select ON or OFF and
press RETURN.
esET UP
CHANNEL ERASE/ADD
CH CAPTION/GUIDE
VIDEO LABEL
►CABLE; OFF
AUTO PROGRAM
LANGUAGE:ENGL ISH
CONVERGENCE
DMENU
Use Î Ex I t
5
Press MENU to return to the original screen.
To move up/right, press + A.
To .move down/left, press - V,
6 Repeat steps 4 and 5 to adjust other lines
until all three lines converge and are seen
as a white cross.
7
Press MENU to return to the original screen.
Note
• If CABLE appears in black, the projection T\^ is set to a video
input and you cannot select C.ABLE. Press T\^ on the remote
commander so that a channel number appears.
14- en Getting Started