Connecting speaker systems, Front front, Speaker (r) speaker (l) – Sony STR-GX900ES User Manual
Page 9: To the second front speaker system, Impedance, Select, Rear, Selecting the impedance, Deciding where to place your speakers, Connechrg speaker systems
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Speaker Systems
Make sure you match the + and - of the speaker cord to the +/- diagram on the speaker terminals. If the cords are reversed, the
sound will be distorted and will lack bass.
Front
Front
speaker (R) speaker (L)
to the second front
speaker system
IMPEDANCE
SELECT
Rear
Rear
speaker (R) speaker (L)
Selecting the impedance
Select the impedance for the front and center speakers.
If nominal impedance of
your speaker is:
Set the IMPEDANCE
SELECTOR to:
4 ohms or higher
4 n
8 ohms or higher
-
Sil
If you are using both FRONT SPEAKERS A and B systems,
use the speakers having nominal impedance of more than
8 ohms and set the IMPEDANCE SELECTOR to the 4 LI
position.
Deciding where to place your speakers
To get the optimum surround sound effect, connect both
front and rear speakers. If you have a center speaker, place it
between both left and right front speakers.
Even though you do not have a full set of speakers, the
receiver is designed to give the best possible surround sound
effect. For details, see "Selecting the Center Mode" on page
.80.