Sony STR-GX900ES - Manual (Page 38)

Creating Custom Sound Fields
(continued)
8
To adjust the equalizer slope of the middle
range, press EQUALIZER SLOPE.
Each time you press EQUALIZER SLOPE, the
equalizer slope changes between NARROW, MID
and WIDE. The slope will be made around the
selected frequency.
Repeat steps 4 through 7 for other
frequency bands until you obtain the
equalization curve that you want.
Adjusting the tone controls (STR-GX800ES)
You can adjust the bass and treble sound. The tone controls
work on all the sound fields, including Dolby surround.
When the middle frequency band overlaps the bass
or treble frequency band during adjustment
The setting level of the bands which overlap each other will
accumulate. For example, if you adjust 1 kHz band in
middle range to +2 dB after adjusting 1 kHz band in treble
range to +4 dB, the overall level of 1 kHz band is +6 dB.
However, the overall level is accumulated only between ±10
dB.
To cancel the equalizer effect
Press EQ/TONE ON/OFF button on the remote. The sound
without equalizer effect will be heard.
You can compare the sound with ec]unlizer effect and the
sound without equalizer effect by switching the EQ/TONE
ON/OFF button.
To cancel the tone effect
Press EQ/TONE ON/OFF buttcm on the remote. The sound
without tone effect will be lieard.
You can compare the sound with tone effect and the sound
without tone effect by switching the EQ/TONE ON/OFF
button.
38