Sony STR-GX900ES - Manual (Page 8)

Hookups
(continued)
Connecting Video Components
Make sure that you connect each plug correctly: red plugs to the right channel (R) jacks of audio signals; white plugs to the left
(L) channel jacks of audio signals; and yellow plugs to the video signals.
Monitor TV Monitor TV
VCR 1
VCR 2
to AUDIO/
VIDEO OUT
to AUDIO/
VIDEO OUT! to AUDIO/
VIDEO IN
to VIDEO 3/
INPUT on the
front panel
s(o)@
to AUDIO/
VIDEO OUT
to AUDIO/
VIDEO IN
to VIDEO
IN
mm
mm
:mm
^mm
LD player
to AUDIO/
VIDEO OUT
VCR 3 Camera
recorder
mm
to S VIDEO
IN
to S VIDEO IN
■m'
•m
-m-
-m
VCR 1
to S VIDEO OUT
to S VIDEO
OUT
© ©:
© ©
© ©;
© ©
to S VIDEO
IN
VCR 2
to S VIDEO OUT
LD player
to AUDIO/VIDEO OUT
TV
If your video components have S VIDEO IN/OUT
jacks
Use the S VIDEO jacks instead of the conventional video
jacks. This will give you a clearer picture.
Notes
• The S VIDEO circuitry and the VIDEO circuitry of this unit
are independent of each other. The signals input from the
S VIDEO jacks are not output to the VIDEO jacks, and the
signals input from the VIDEO jacks are not output to the S
VIDEO jacks.
Therefore, you can connect the S VIDEO jacks between
video components which have the S VIDEO jacks but you
should connect the VIDEO jacks if one of them has no S
VIDEO jacks.
• If your monitor TV does not have an S VIDEO IN jack
while other video components have the S VIDEO jacks, be
sure you do not connect them to the receiver's S VIDEO
jacks. Otherwise, no picture will be seen.
8
If you are connecting more than two video
components
Be sure to use the jacks in the different section for each
component.
For example, you cannot use both S VIDEO jacks and VIDEO
jacks in VIDEO 1 section simultaneously.