What happens during multi-ams operation, Beginning of track, M[;] ►►[;) w[ai – Sony TC-KA1ESA User Manual
Page 7: Previous, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Locating a Track (Multi-AMS/
Auto Play/Memory Play)
You can locate the following/previous tracks (Multi*
AMS: Automatic Music Sensor) or the beginning of a
tape quickly. You can even locate a specific point
anywhere on a tape.
MSn MIMORY
Tg locate
Press
the beginning of (he next
or succeeding tracks
(Multi-AMS*)
►O' as Rtany limes as you
want while piaying-
For example, to locate
2
tracks
ahead, press twi^.
the beginning of the
current track (Multi-AMS*)
^ once while playing
the beginning of the
preceding tracks
(Multi-AMS*)
^ as many times as you
want while playing.
For example, to locate 2 tracks
behind, press three times.
the beginning of a tape
(Auto Play)
MEMORY repeatedly until
"ME.MORY" disappears in the
display. Then press'^4
while holding down t>.
a particular point on a
tape (idemory Play)
MEMORY repeatedly until
”MEMORY” appears in the
display.*Find the point you
want, and press RESET (o
reset the tape counter and to
memoriae the point.
To l«ate the memorized
pi>int, press while
holding down (Press
only to stop at ”0.00.'')
What happens during Multi-AMS operation
when Multi-AMS is operating, "PLAY” appears. And eaih
time the deck detects a blank space, the indicated number
decreases by one. After locating the beginning of the
specified (rack, the counter indication appears again and the
deck starts playing the track.
^: Beginning of track
- M [ ; ]
► ► [ ; ) w [ a i
Previous
track
Current
track
Next
track
Notes
• The Multi-AMS function may not work correctly if:
— the blank space between tracks is less than 4 seconds
long.
— the signal strength of the left and right channels are
very different.
— there is a passage of low frequencies or very low
volume within a track.
• Since the counter is not a digital clock, it will differ from
the actual elapsed playback or recording time.
You can use the Multi-AMS io locate up to the .KHh (rack
after or before the current track.