Using alternative power sources, Note on power sources, Using hthise current – Sony CCD-TR600 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using Alternative Power Sources

You can choose any of the following power sources for your camcorder battery pack (p. 6), house
current, and 12/24 V car battery. Choose the appropriate power source depending on where you want
to use your camcorder.

Place

Power source

Accessory to be used

Indoors

House current

AC power adaptor
AC-V25A/V25B/V25C/V15 (suppUed),
AC-SIO

Outdoors

Battery pack

Battery pack NP-55 (supplied), NP-80/80D,
NP-77H, NP-68, NP-66H, NP-C65, NP-60D

In the car

12 V or 24 V car battery

DC packDCP-77

Note on power sources

Disconnecting the power source or removing the battery' pack during recording or playback may
damage the inserted tape. If this happens, restore the power supply again immediately.

Using HtHise Current

— For the customers supplied with the AC-V25A/V25BAA25C AC power adapter

(1) Lift up the viewfinder.
(2) Connect the AC power cord to a wall outlet. Connect the bottom of the AC power adaptor to the

battery mounting surface of the camcorder.

(3) Set the selector to VTR (DC OUT).

POHBli

iil

wiiaiiiiiif