Audio adjustment, Selecting a program source, Adjusting volume – Sony STR-D590 User Manual
Page 11: Adjusting tone quality, Adjusting left and right sound baiance, Reinforcing the bass, Seiecting the speaker system, Selecting the speaker system, Audio adjustment selecting a program source
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Audio Adjustment
Selecting a Program
Source
BASS and TREBLE VOLUME DBFB
Adjusting volume
To adjust volume
Turn VOLUME,
To reduce the sound to a low level temporarily (- 20 dB
attenuation)
Press MUTING so that the indicator lights up.
Press again to restore the same listening level as before and
the indicator goes off.
Adjusting Tone Quality
Adjust BASS or TREBLE for the optimum sound.
Adjusting Left and Right Sound Baiance
Adjust BALANCE to correct stereo imaging, when the
speaker position is not symmetrical.
Reinforcing the Bass
Press DBFB (Dynamic Bass Feed Back) so that the
indicator lights up.
Press again to turn off the effect so that the indicator goes
off.
Seiecting the Speaker System
To drive speaker system A: Press SPEAKERS A.
To drive speaker system B: Press SPEAKERS B.
To drive both speaker systems A and B: Press both
SPEAKERS A and B.
For headphone listening: Connect headphones to
HEADPHONES and set SPEAKERS A and B to off.
CD player
Tape deck or
DAT deck
VCR
LD player
Select the progam source.
FUNCTION selector to be
pressed
Phono record
PHONO
Radio Broadcast
TUNER
Compact disc
CD
DAT or Taped
programs
TAPE
Video programs
VIDEO 1, VIDEO 2
If only pressing one of the FUNCTION buttons on
the supplied remote commander, both the power of
its operating equipment and the receiver are turned
on.
Start the selected program.
IMPORTANT
Speaker systems A and В are series connected. No sound
can be heard if the SPEAKERS A and В buttons are set to
on when only one speaker system is connected.
11