Sony CDP-C331 - Manual (Page 17)

Maintenance Specifications
Cleaning the Cabinet
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with mild detergent solution. Do not use
any type of abrasive pad scouring powder or solvent such
as alcohol or benzine.
Cleaning Discs
Before playing, clean the disc with the cleaning cloth.
Wipe the disc from the center out.
Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for analog discs.
i
After playing, store the disc in its case.
System
Laser
Wavelength
Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Wow and flutter
Outputs
General
Power requirements
Power consumption
Dimensions
Mass
Compact disc digital audio system
Semiconductor laser
780-790 nm
2 Hz-20 kHz (±1.5 dB)
More than 90 dB
More than 90 dB
Less than 0.01% (1 kHz)
More than 85 dB (1 kHz)
Below measurable limit
LINE OUT (phono jacks)
Output level 2 V (at 50 kilohms)
Load impedance over 10
kilohms
120 V AC, 60Hz
12 W
Approx. 430 X 125 X 385 mm
(w/h/d) (17 X 5 X 15% inches)
including projecting parts and
controls
Approx. 6 kg (13 lbs 4 oz), net
Supplied accessories
Audio signal connecting cord
(phono plug X 2 •<-* phono plug x 2) (1)
Design and specifications are subject to change without
notice.
17