Sony CFD-470 - Manual (Page 16)

Various Disc Playing Modes
lb Play the Seiecttons in ttw Onter DMrired №
To stop program play
Press □.
To reprogram the selections
• Open and close the disc holder to erase the previous pro­
gram and repeat the steps from the beginning. Be sure the
OPR/BATT indicator iights up; otherwise, the selections
programmed cannot be erased.
• Press PGM CLEAR/EDIT to erase the last selection
programmed.
Each press of PGM CLEAR/EDIT erases one selection.
Press the number button to program in a new order.
To program a pause
Be sure that the AUTO SPACE indication does not appear in
the display window. Press QD at the position desired. Each
press of OOcounls as one selection.
3
P 04
8
During program play the player will be set in pause when it
comes to R To resume playing, press
DD again.
To check the programmed selections
During programming, press ►►/PGM CHECK. You can
check the selections from the beginning. Each press of
►►/PGM CHECK shows the programmed selections in
order.
To check the total playing time of the selections
programmed
During programming, press DISPLAY. The total playing time
of the selections programmed appears in the display window.
If there is a PAUSE in the programmed selections, the play­
ing time after the PAUSE appears.
To return to the normal display, press DISPLAY again.
When the programmed selections are finished
The selection number in the music calendar disappears one
by one, but the programmed selections are memorized until
the lid of the disc holder is open.
To release program play _____
Press SHUFFLE/PROGRAM until the PROGRAM MelH
indication disappears from the display window.
16