Sony XR-C500 - Manual (Page 8)

fea
Receiving the memorized
stations
1
Press
( SOURCE ) repeatedly to select the
desired band.
2
Press the number button (Q3 to QD)
momentarily, where the desired station
is stored.
If you cannot tune in a preset
station
Press either side of f seek / ams
)
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (
SEEK/AMS )
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
1 SHIFT V then press (3) (PLAY MODE) repeatedly until
"LOCAL" (local seek mode) is displayed. Then press (2)
(—►) to select "ON."
Only the stations with relatively strong signals will be
tuned in.
T i p
If you know the frequency of the station you want to listen
to, press and hold either side of (
seek / ams ') for two
second, until the desired frequency appears (manual
tuning).
If FM stereo reception is poor
— Monaural Mode
1
Press ( SHIFT •). then press (D (PLAY
■MODE) repeatedly until "MONO"
appears.
2
Press ® (—►) repeatedly until
"MONO-ON" appears.
The sound improves, but becomes
monaural ("STEREO" disappears).
To go back to the normal mode, select
"MONO-OFF" in step 2 above.
Changing the displayed items
Each time you press ( dspl ). the item changes
as follows;
Frequency ► Clock
Storing the station names
—station Memo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can store up to eight characters
for a station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press ( LIST ) for two seconds.
F n
3
Enter the characters.
O Press C±) to select the desired
characters.
( A - * B - r C - r - Z - r O - r 1 - » 2 - »
... +
F t l I
If you press GD/ the characters appear
in the reverse order.
If you want to put a blank space
between characters, select"_" (under-
bar).
e
Press ® (—►) after locating the
desired character.
The flashing cursor moves to the next
space.
Fff
If you press GD (<—), the flashing cursor
moves to the left.
O Repeat steps O and
Q
to enter the
entire name.
3
To return to the normal radio reception,
press ( LIST ) for two seconds.
Tip
To erasefcorrect a name, enter " J' (under-bar) for each
character.
8