Sony XR-C500 - Manual (Page 14)

Notes
• Once a disc name has been displayed for five seconds, the
display goes back to its normaJ playback mode. To turn
off the display, press (DSPL).
• the track names are not displayed during MD playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file,
appears in the display.
• If the disc information has not been read by the unit,
"NO READ" appears in the display. To load the disc,
first press the number button, then choose the disc that
has not been loaded.
• The information is appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Playing the specific tracks only
You can select:
• BANK-ON to play the tracks with the
"PLAY" setting.
• BANK-INV (inverse) to play the tracks with
the "SKIP" setting.
1
During playback, press ( shift ), then
press
d )
(PLAY MODE) repeatedly until
"BANK" appears.
2
Press (S (—») repeatedly until the
desired setting appears.
• BANK-ON —► BANK-INV —► BANK-OFF
r
J
Selecting the specific
tracks for playback
— Bank
(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press ( shift ).
Then press d2> (PLAY MODE) for two
seconds.
Bank edit mode
5_ I ^ P L R S
C U I
5 f l W K - D W
Playback starts from the track following the
current one.
To go back to the normal playing mode, select
"BANK-OFF" in step 2 above.
Note
If you have not labeled the disc, the bank edit mode
does not appear. To go back to the normal playback
mode, press (
shift ).
2
Press either side of ( seek / ams ) to seiect
the track number you want to skip and
press CD (ENTER).
C U E , . 3
S H I P
14
The indication changes from "PLAY" to
"SKIP." If you want to return to "PLAY,"
press (ENTER) again.
3
Repeat step 2 to set the "PLAY" or "SKIP"
mode on all the tracks.
4
Press CD (PLAY MODE) for two seconds.
Notes
• You can set the "PLAY" and "SKIP" mode on up to 24
tracks.
• You cannot set the "SKIP" mode on all the tracks.