Sony XR-C500 - Manual (Page 6)

jtai
Listening to the tape
1
Press (OPEN
)
and insert the cassette.
2
Close the front panel.
If the cassette is already inserted, press
(SOURCE) until "FWD" or "REV" appears to
start playback.
The side facing up is being played.
Tips
• To change the tape transport direction, press (T)
• "METAL" appears in the display when you insert the
metal or CrOi tape (Auto Metal function).
To Press
Stop playback (OFF)
Eject the cassette ( OPEN ) then ±.
Fast-winding the tape
During playback, press either side of
(SEEK/AMS ) for one second.
To start playback during fast-forwarding
or rewinding, press (2)
Locating the beginning of the
tracks
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEiWMS) momentarily.
To locate the succeeding tracks
____ To locate the previous tracks
Note
The AMS function may not work when ;
• the blanks between tracks are shorter than four seconds.
• there are noises.
• there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press ( dspl ). the item changes
as follows;
• Tape playback-------► Clock —► Frequency* -i
* While the ATA function is activated.