Changing the sound and display settings, Playing a cd or ivid, Press (source) until the desired changer appears – Sony XR-C500 User Manual
Page 11: 2 press (d (-♦) to select "a. scrl-on, Changing the soxmd and display settings, Playing a cd or md, Co/mp chah^dr.'l, Shift)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the sound and
display settings
You can set:
• BEEP to turn on or off the beeps,
• DIM (dinuner) to change the brightness of
the display.
• D. INFO (dual information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•LOUD (Loudness) to enjoy bass and treble
even at low volume. Bass and treble will be
reinforced.
• RM (Rotary Remote) to change the operative
direction of the controls of the rotary remote.
— Select "NORM" to use the rotary remote
as the factory preset position.
— Select "REV" when you mount the rotary
remote on the right of the steering column.
1
Press
(SHIFT),
then press
(T)
(SET UP).
2 Press CD (SET UP) repeatedly until the
desired setting mode appears.
Each time you press CD (SET UP), the item
changes as follows:
CLOCK -» BEEP -► DIM -► D. INFO -»
LOUD — RM
3 Press (T) (—♦) to select the desired
setting (for example: ON or OFF).
4
Press
(SHIFT).
When the mode setting is complete, the
normal playback mode appears.
CO/Mp Chah^dr.'l .
You can control up to 10 CD changers and MD
changers with this unit.
Playing a CD or IVID
Press
(SOURCE)
until the desired
changer appears.
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (
DSPL
) during CD/MD
playback, the item changes as follows:
Elapsed playback time
I
Disc name*’
I
Track name**
I
aock*5
* I if there is no prerecorded name for an CD or MD, "NO
NAME" appears in the display.
*2 If the track name is not prerecorded, "NO NAME"
appears in the display.
♦3 // the dual information is on, clock does not appear in
the display.
Tip
If the name of the MD is too long, you can scroll it across
the display by pressing (
s h i f t
) , then CD (*^).
Automatically scrolling a disc name
— Auto Scroll
The Auto Scroll function automatically scrolls
the disc or track name of the MD when you
press (
DSPL
) and the name length exceeds 8
characters.
1 Press (SHIFT), then press (D (SET UP)
repeatedly until "A. SCRL." appears.
2 Press (D (-♦) to select "A. SCRL-ON.'
To cancel Auto Scroll, select "A. SCRL-OFF" in
step 2 above.
mk
c
D
a
o’
D
o
n
D"
0)
3
ID
11