Sony CFD-C1000 - Manual (Page 24)

Waking up to music (continued)
Tips
• To exit the standby
mode, press STANDBY
to make the ©
disappear from the
display.
• The preset settings
remain until you reset
them.
I’ress TIME SET + or
ENTER MEM. - to set the \ olume, then
SOUND
TIMFR
I I I I I I I .
" 1/ ni D
- y U L C_,
-------------- I I I I I I I I I ^
7
Press STANDBY.
The © indication lights up and the power goes off.
At the preset time, the power will go on, and the
music will play. Then the power will go off at the
preset time, and the player will enter into the
standby mode.
To check/change when the playback will start
Press TIMER, then ENTER MEM. Each time you press
ENTER MEM, a stored setting is displayed in the set
order. To change the setting, display the setting you
want to change and re-enter it.
To use the player before a timer playback starts
Just turn on the power, and then you can use it.
If you turn off the power before the preset time, timer
playback will start at the preset time.
In case of the radio, however, if you listen to the
station which is different from the one you tuned in
in step 1 on page 23, you will hear that station at the
preset time. Make sure to tune in the station you want
to listen to before you turn off the power.
To stop play
Press POWER to turn off the power.
24 The Timer