Sony STR-DE335 - Manual (Page 18)

Using Surround Sound
Adjusting the Effect Level (except PRO
LOGIC)
You can make the surround sound more prominent by
increasing the EFFECT level. This control lets vou
adjust the "presence" of the surround effect in six steps
( 1 - 6 ).
1 Start playing a program source.
2
Press EFFECT/DELAY. The effect level ("EFFECT
1" ... "EFFECT 6") appears on the display.
3 Press + / - to select the level you prefer.
'Q' When you use the remote
Each time vou press EFFECT / DELAY, the effect level
changes as follows:
j—EFFECT 1 — EFFECT 2 — . .
L EFFECTS EFFECTS ^----------------------1
Note
Changing the effect level may not produce major variations
in the surround effect when used with certain plavback
cources.
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to the
speaker system you have. Then, adjust each speaker
volume and delay time.
Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.
SOUND FIELD SOUND FIELD
+/-
SOUND FIELD
ON/OFF
EFFECT/
DELAY
TEST TONE
SOUND FIELD
MODE +/-
Selecting the center mode
The receiver offers you four ceirter modes; Phantom,
Normal, Wide and 3 Stereo. Each mode is designed for
a different speaker configuration. Select the mode that
best suits your speaker's system configuration:
1 Press SOUND FIELD ON / OFF to turn on sound
field.
2 Press SOUND FIELD MODE + /~ repeatedly to
select the Dolby surround sound field (PRO
LOGIC or C.STUDIO mode).
3 Press SET UP repeatedly until "CTR MODE"
appears on the display.
18