Naming preset stations, If you make a mistake, Recording – Sony STR-DE335 User Manual
Page 15: Audio signal flow •-: video signal flow, To display index names, Notes, Recording on a minidisc or audio tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiver Operations
Naming preset stations
You can Store names, up to 8 characters long, for vour
preset stations (except for FM RDS stations). Once you
name a preset station, the name appears in the display
instead of the frequency \A’hen you tune to that preset.
The characters you can use include letters, numbers
and symbols.
1
Tune to the preset station you want to name.
2
Press NAME.
The cursor blinks in the display.
3
Use + or - to select the character you desire.
4
Press NAME to move the cursor into position for
the next character.
5
Repeat steps 3 and 4 to enter up to 8 characters.
6
Press ENTER to store the names.
If you make a mistake
Press NAME repeatedly so that the character you want to
change blinks in the display, then use + or - to select the
desired character.
Recording
This receiver makes it easy to record to and from the
components connected to the receiver. You don't have
to connect playback and recording components
directly: once you select a program source on the
receiver, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you've connected all
components properly.
Function buttons
Audio signal flow
•-: Video signal flow
To display index names
Press DISPLAY repeatedly to display index names and
program source (or frequency if you select TUNER).
Notes
• You can also enter a name of up to 8 characters for
program sources. Select the program source you want and
repeat steps 2 to 6.
• To clear program source name, press NAME and then
press the same program source button. Press ENTER to
delete the name (except TUNER).
Recording on a MiniDisc or audio tape
You can record on a MiniDisc or cassette tape using the
receiver. See the instruction manual of your MD
recorder or tape deck if you need help.
1
Press one of the function buttons to select the
program source.
2
Set the component to be ready for playing.
For example, insert a^CD into the CD player.
3
Insert a blank disc or tape into the recording deck
and adjust the recording level, if necessary.
4
Start recording on the recording deck and then
start playing the component.
(continued)
15