Recording on a video tape, Note, Using the sleep timer – Sony STR-DE335 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiver Operations
Recording on a video tape
You can record from a TV or a satellite receiver using
the receiver. You can also add audio from a varieU- of
audio sources when editing a video tape. See )’Our
VCR's instruction manual if you need help.
1
Press TV/SAT to select the program source.
2
Set the component to be ready for playing.
For example, turn on the TV and TV tuner.
3
Insert a blank video tape into the VCR for
recording.
4
Start recording on the VCR.
'Q' You can replace audio while editing a video tape
At the point you want to start adding different sound,
press another function button (for example, CD) and
start playback. The sound from the selected component
will be recorded over the original audio.
To resume recording the original sound, press the
TV/SAT function button.
Note
You cannot record the audio and video signal during
5.1 CH/DVD mode.
Using the Sleep Timer
You can set the amplifier to turn off automatically at a
time you specify.
SLEEP
Press SLEEP on the remote while the power is on.
Each time vou press SLEEP, the time changes as shown
below.
► 2:00:00 -* 1:30:00 —► 1:00:00 —0:30:00 — OFF-
The display dims after you specify the time.
You can check the time remaining before the
amplifier turns off
Press SLEEP on the remote. The remaining time appears
in the display.
16