Location and function of parts and controls – Sony PVM-2950Q User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Location and function of parts and controls
Front nanol
wiiimq «ounnn f
«61^ ftOFF
SJ-
[
5
]----
m—[
m-
[
9}—i
BS—
I
m
m
VOLUME
□
1^'"" ’I
I LINE 3 I
I
El
SELECT
□
[U POWER switch
Press to turn the monitor on. Press again to turn it off.
[2] STANDBY indicator
Lights up when the monitor is turned off with the
remote commander.
[3] Remote sensor
Receives the beam from the remote commander.
[
4
]
CONTROL key
To operate the keys on the front panel, first press this
key. Then the keys light up or flash that shows they can
be operated. Press again to deactivate them.
[5] VOLUME +/- keys
Press to obtain the desired volume.
[6] LINE 1, LINE 2. LINE 3 keys*
Press to select the line inputs.
H] Y/C key*
Press to select the Y/C input of LINE 1 or LINE 2.
H] RGB key*
Press to select the RGB input of LINE 3.
[H MENU key
Press to make the menu appear or to go to the following
menu.
Sa SELECT +/- key
Press to move the cursor (►) to an item or to adjust
value in a menu.
O ENTER key
Press to select the desired item in a menu.
* Each key acts as follows.
CONTROL
On
Off ■
Selected key
Flash
Light up
Not selected key
Light up
Light off ■
If the picture disappears suddenly and the STAND BY
indicator flashes, there may be a failure in the monitor.
Unplug the unit and call your authorized Sony dealer.