Specifications, Video signal, Picture performance – Sony PVM-2950Q User Manual
Page 11: General, Inputs and outputs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifications
Video signal
Picture tube
Color system
Resolution
Frequency response
29" Super Trinitron tube
Visible picture size: 675 mm
(27" measured diagonally)
AG pitch: 0.70 - 0.85 mm
Anti-glare & Anti-static
NTSC, PAL, SECAM, NTSC
j
43,
PAL60
600 TV lines at the center
VIDEO: 7 MHz (-3 dB)
S VIDEO: 8 MHz (-3 dB)
RGB: 10 MHz (-3 dB)
Picture performance
Color temperature
Line pull range
Overscan
Zooming
9300K/6500K (standard)/3200K
switchable
Horizontal: ± 500 Hz
Vertical: -8 Hz
7% preset (± 3% variable)
Within 5%
General
Power requirements PVM-2950Q
100-120 VAC, 50/60 Hz,
MAX. 3.7 A .
PVM-2950QM
220 - 240 V AC, 50 - 60 Hz,
MAX. 1.2 A
Operating temperature range-
0-35°C (32-95°F)
687
X
538
X
529 mm (w/h/d)
(27 1/-8
X
21 1/4
X
20 7/8 inches)
52 kg (114 lb 10 oz)
AC power cord (1)
AC plug holder (1)
Remote commander RM-854 with a
battery (1)
n
l£
Dimensions
Mass
Supplied accessories
Optional accessories
Speaker system
TV tuner
SS-X6A
ST-92TV (USA only)
inputs and Outputs
VIDEO IN
Y/C IN
AUDIO IN (L,R)
BNC connector
1 Vp-p, sync negative
75-ohm (auto), loop through
4-pin mini DIN connector
Y: 1 Vp-p,syr\c negative
C: 0.286 Vp-p (burst signal) (NTSC)
0.3 Vp-p (PAL)
75-ohm (auto), loop through
Phono jack
-5 dBs high impedance,
loop through
R/R-Y,G/Y,B/B-YIN
Sync input
Speaker output
BNC connector
R, G, B channels: 0.714 Vp-p,/non-
composite, 75-ohm terminated
(525 lines)
0.7 Vp-p/non composite, 75-ohm
terminated (625 lines)
1 Vp-p/composite, 75-ohm
terminated
Y channel: 1.0 Vp-p/composite,
75-ohm terminated
0.7 Vp-p/non composite, 75-ohm
terminated
R-Y, B-Y channels: 0.7 Vp-p,
75-ohm terminated
BNC connector
H (or composite) SYNC, V SYNC,
0.5 - 5 Vp-p, 75-ohm terminated
8-16 ohm, 7 W + 7 W
11