Sony KV-13TR20 - Manual (Page 4)

Remote Commander RM-729
[T^ MUTING button
Press to mute the sound immediately.
The “MUTING” display will appear and remain on the
screen. Press it again or press VOLUME to restore
the sound.
[19]TVA^IDEO button**
DISPLAY button
Press to make the channel number appear on the
screen.
(21]PICTURE buttons**
[^VOLUME buttons* *
11^CH (channel) scan buttons* *
m POWER switch
Once the unit is turned on with the POWER switch on
the TV, press to turn the unit off (standby mode). Press
again to turn it on.
SLEEP button
Press to have the unit turn off automatically after one
hour. The “SLEEP” display will appear on the screen a
few seconds and the SLEEP lamp on the TV will remain
lit for one hour.
To cancel the sleep timer, press again so that the
“SLEEP” display disappears, or turn off the TV.
[g§ Channel number buttons
Used to select channels.
[13 ENTER button
Used to select channels.
* *The functions of these buttons are duplicated on the TV.
1
Press POWER on the TV.
POWER
OFF ON
CABLE
Set the CABLE selector to:
ON for CATV channels
OFF for VHF/UHF channels
Select the desired channel in one of the
following two ways.
O Press the number(s) of the channel. Then
press ENTER.
0 To select channels already preset, press CFI
“+” for higher-numbered channels or for
lower numbered channels.
^ Adjust VOLUME.
□
VOL
□
+ to increase
- to decrease
Adjust picture contrast.
a -r to increase
PICTURE
CD - to decrease