Sony KV-13TR20 - Manual (Page 3)

I^GATION AND FUNCTION OF CONTROLS
Front
FFl
0
---------------
4
—
-----------------------------
—
LLiJ
j
!
^ L—^ --------------------------- f= --------------
0
--------------- RÏÏI
rn Bar display
Indicates level of volume and picture contrast.
[U Speaker
[3] Earphone jack (minijacl^
0 BRIGHT (brightness) control
Turn clockwise for more brightness or counterclockwise
for less.
fsl COLOR control
Turn clockwise for more color intensity or
counterclockwise for less.
0 HUE control
Turn clockwise to make the tones greenish or
counterclockwise to make them purplish.
0 CABLE selector
To view CATV programs, set this selector to ON.
0 ERASE button
Used for channel presetting. Press to erase channels.
0
ADD button
Used for channel presetting. Press to add channels.
0 PICTURE buttons
Press PICTURE “+” to increase picture contrast, or
to decrease it.
0 TVA/IDEO button
Press to view the picture from the connected VCR.
0 VOLUME buttons
Press VOL “+" to increase volume, or to decrease it.
0 CHANNEL scan buttons
Press “+” for higher-numbered channels and for
lower-numbered channels.
0 POWER switch
Press to turn the unit on.
0 Remote control detector
Point the Remote Commander towards this detector.
0 SLEEP lamp
Lights up when the SLEEP button on the Remote
Commander is pressed.
0
On-screen display
Shows channel numbers, “MUTING”, and “SLEEP”
indications.
BATTERY INSERTION
■4 Insert two size AA (R6)
1 Open the lid.
batteries with correct
polarity.
-
Notes
• In normal operation, batteries will last up to half a year. If
the unit does not operate properly, the batteries might be
exhausted. Replace all with new ones.
• To avoid damage from possible battery leakage, remove the
batteries for extended unused periods.
• Be sure that there are no obstructions between the
Commander and the TV.
• Operable range is limited.
• If a Remote Commander not recommended is used to
operate this TV, or if the supplied Remote Commander is
used to operate another TV, the TV may not operate
properly.