Sony DVP-FX810 - Manual (Page 35)

Playing an Audio CD or MP3 Disc (continued)
Repeat A-B dB liMV
1. To repeat a sequence during disc piayback, press
A-B at your chosen starting point. The Repeat
icon and “C^A” appear on the menu screen.
2. Press A-B again at your chosen end point. The
Repeat icon and “C^AB” appear on the menu
screen, and the sequence begins to piay
repeatediy.
3. To exit the sequence and return to normai piay,
press A-B again. The Repeat icon disappears
from the menu screen.
MP3 disc compatibility with this player is limited
as follows:
• Sampling frequency: within 1 1 - 4 8 kHz (MP3)
• Bit rate: within 32-320kbps (MP3)
• The piayer cannot read an MP3 fiie that has a fiie
extension other than “.mp3”.
• CD-R physical format should be ISO 9660.
• If you record MP3 files using software that
cannot create a file system (eg. Direct-CD),
it is impossible to playback MP3 files. We
recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
• File names should have a maximum of 14 letters
and must incorporate an .mp3 extension.
• They should not contain special letters such as
/ ? * : “ < > ! etc.
• The total number of files on the disc able to
be played is about 648.
• The total numberof folders on the disc
able to be played is about 299.
NOTES:
• When playing back an MP3 in VBR mode, the
displayed Bit Rate will be incorrect. The Time
search function and time counter may not work
correctly during the playback of an MP3 in
VBR mode.
• The number of files and folders on the disc able
to be played is determined by the recording
conditions, but the total number cannot exceed
648.
• If layer 1 and 2 of MPEG 1 are not compatible
with the player, noise may be heard during
playback of files in these formats.
>
a
<
3
n
0
a
O
■a
0
35