Sony CDP-C77ES - Manual (Page 30)

Specifications
Compact Disc Player
Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Outputs
LINE OUT (FIXED)
(phono jacks)
LINE OUT (VARIABLE)
(phono jacks)
DIGITAL OUTPUT
(OPTICAL) (optical
output connector)
HEADPHONES
(stereo phone jack)
General
Power requirements
Power consumption
Dimensions (w/h/d)
Weight
2 Hz-20 kHz (±0.3 dB)
More than 110 dB
More than 100 dB
Less than 0.0025%
(CDP-C87ES/C77ES)
More than 105 dB
Output level 2 V (at 50 kiloohms,
non DSP mode)
Load impedance over
10 kiloohms
Output level max 2 V
(at 50 kiloohms, non DSP mode)
Load impedance over
10 kiloohms
Wave length 660 nm
Output level -18 dBm
Output level max. 15 mW
Load impedance 32 ohms
USA model: AC 120 V, 60 Hz
Australia model:
240 V AC. 50/60 Hz
18 W
Approx. 470 X 125 X 385 mm
(16*/8 X 5 X 15V4 inches)
(CDP-C387ES/C77ES)
Including projecting parts emd
controls
Approx. 9.4 kg (20 lbs 12 oz), net
(CDP-C87ES)
Approx. 8 kg (17 lbs 11 oz), net
(CDP-C77ES)
Remote Commander RM'D715 (CDP>C77E8 supplied)
RM-D870 (CDP-C87ES supplied)
Remote control system Infrared control
Power requirements 3 V DC with two size AA batteries
(lEC designation R6)
Dimensions 62 X 20 X 175 mm (w/h/d)
(2Va X ’V,e X 7 inches)
Weight 130 g (4.6 oz) including batteries
Supplied Accessories
CXinnecting cord
(2 phono plugs «-» 2 phono plugs) (1)
Serial chain cable (1) (CDP-C87ES only)
CONTROL S cable (1) (CDP-C87ES only)
Remote commander (1)
Size AA batteries (2)
Screws (1 set)
Optional Accessory
Audio optical connecting cord PO&15
Design £uid specifications subject to change without
notice.
30