Sony CDP-C77ES - Manual (Page 16)

Convenient Features for Tape Recording
The following functions are convenient for editing your own
tapes.
Time Fade and Fade in/Fade out cannot be operated
when the DIGITAL (optical) OUT is used for connections.
Fading in/Fading out
You can have the play fade in and fade out between 2-10
seconds.
When no time is specified, the play will fade in and fade
out for 5 seconds.
To set the fade time_________________________________
1 Press ■.
2 Press FADER. "FADE 5 SEC” will appear in the display
window. The actual fade time “5” will be flashing.
3 Press to select fade time between 2-10
seconds.
4 Press FADER.
To end the play fading out
Press FADER when you want to start fading out.
flashes in the window, and play fades out and unit
enters the pause mode.
To restart the play fading In
Press FADER in the pause mode.
flashes in the window, and play fades in.
Fading out after a desired
duration-Time Fade
You can have the play fade out at the end by designating
the play duration. Once time fade is set, it functions twice
for editing both sides of a tape. You can change discs
without canceling this function. The fade time is preset to
5 seconds, but you can change it between 2-10 seconds.
To set time fade___________________________________
1 Press EDIT/TIME FADE twice during stop.
lii.. lis displayed in the window.
2 Set the desired play duration, using numeric buttons.
e.g. To set to 27 minutes, press |H(7]Qni(3ni«
You need not press buttons for seconds, unless
required.
You can designate the tape length easily with the
buttons. Each time you press a button, the
time changes in the following way.
• Press : Press •
C C-90 45.------------------------- .-----------------C-46 23.- -
C-74 37.---------------- C-60 30.-----------------C-54 27.-- ■
To set the seconds, press The time increases
or decreases by 10 seconds.
Note
The desired play duration can be set from 10 seconds up to 59
minutes 59 seconds.
3 Press EDIT/TIME FADE.
4 To start play, press
>■.
After the designated time, play fades out and pauses.
Tape side B lights up. Press
II
or ^ to resume playing
for the other side of the tape. If you press FADER, fade
in will start When the play fades out for the second
time, the unit pauses and the time fade function is
canceled.
When playback ends in the duration of time fade
Time fade function will be kept on. Change the disc and
start playback automatically when the total playing time is
within some seconds before the designated time, the
player fades out.
To cancel time fade
Time fade will be canceled when
- EDIT/TIME FADE is pressed once again.
- -«/>^ (manual search) is pressed during play.
To tOeptay the tbne remaining imtK the time eat
Press TIME/MEMO twice.
If the PEAK SEARCH is pressed after setting time
fade, time fade is released but peak search is kept active.
16