Step 2: setting up your speakers (continued), M connect the center surround speaker, 1/(1) (power) – Sony MHC-RXD6AV User Manual

Page 8: Qj connect the power cord to a wall outlet, Q| deactivate the demo mode by, Pressing demo when the system is turned off, Adjusting the speaker volume

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 2: Setting up your speakers

(continued)

Connect the center surround

speaker.

Connect the speaker cords to the
appropriate CENTER SPEAKER jacks.
Connect the solid cord to the red jack
and connect the striped cord to the black
jack.
Keep the speaker cords away from the
antennas to prevent noise.

Insert only the stripped portion.

Adjusting the speaker
volume

To enjoy Dolby Pro Logic Surround sound,
turn the Dolby Pro Logic mode on, then
adjust the volume of each speaker using the
test tone that the system provides.

1/(1) (Power)

Solid (®)

Stripe (©)

Qj Connect the power cord to a wall

outlet.

Demo mode appears in the display.

Q| Deactivate the demo mode by

pressing DEMO when the system is

turned off.

The demo mode is also deactivated
when you set the time.

Tip

You can reinforce the bass sound by connecting an
optional super woofer to the super woofer
connector.