Ote about the ac power cord, Zable or antenna connections, Lonnecting directly to cable or an mtenna – Sony KV-32FV1 User Manual
Page 7: Cable and antenna, Cable or antenna connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ote about the AC Power Cord
he AC power cord is attached to the rear of
he TV with hooks. Use caution when
emoving the AC plug from its holder. Gently
lide the cord in the upward direction, without
emoving the cord from the two lower hooks.
You can
Do not remove
the cord from
these hooks.
Zable or Antenna Connections
lonnecting directly to cable or an
mtenna
he connection you choose will depend on the
Able found in your home. Newer homes will
e equipped with standard coaxial cable (see
V); older homes will probably have 300-ohm
vin lead cable (see B); still other homes may
mtain both (see C).
VHF only
or
VHF/UHF
or
Cable
75-ohm
coaxial cable
(Rear of TV)
VHF/UHF
300-ohm twin
lead cable
(Rear of TV)
VHF/UHF
75-ohm coaxial cable
VHF
and
UHF
(Wi
(Rear of TV)
VHF/UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
CATV cable
(Rear of TV)
AUX
=^33 tc8)
(No connection "TO
CONVERTER" in this case)
Antenna cable
TO CONVERTER
VHF/UHF
Select cable or antenna mode by pressing
ANT on the remote control.
Note
• In order to receive channels with an
antenna, you will need to turn your
CABLE to OFF and perform the AUTO
PROGRAM function, (see "CFfANNEL
SET UP" on page 24)