Dbs connections, Connecting a dbs (direct broadcast, Satellite) receiver and a vcr – Sony KV-32FV1 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DBS Connections
Connecting a DBS (Direct
Broadcast Satellite) receiver
1 Connect the cable from your satellite
antenna to your DBS receiver.
2
Attach the coaxial connector from your
cable or antenna to VHF/UHF on your TV.
3
Using A/V connectors, connect AUDIO
and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your TV.
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR
1 Connect the cable from your satellite
antenna to your DBS receiver.
2
Attach the coaxial connector from your
cable or antenna to VHF/UHF IN on your
VCR.
3
Using a coaxial connector, connect
VHF/UHF OUT on your VCR to
VHF/UHF on your TV.
4 Using A/V connectors, connect AUDIO
and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your VCR.
5 Using A/V connectors, connect AUDIO
and VIDEO OUT on your VCR to AUDIO
and VIDEO IN on your TV.
For optimum picture quality, use S VIDEO
instead of the yellow A/V cable. S Video does
not provide sound, your audio connectors
must still be connected.
(Rear of TV)
1
DBS receiver
Satellite
antenria
cable
3--#l
VHFHJHF
«ucwR «uaomMo
m
CmVERTCR
VHMMF
Waiaf-te
------------------- 1-------
VMC-810S/820S (not supplied)
a n n---- MULMU-n
¥ Hr
—AUDIO-L
M/---------VIDEO (y
AUDIO-R (red)
-L (white)
(yellow)
Pressing TV/VIDEO on the remote control will
allow you to view from the DBS or VCR.