Sony KV-32FV1 - Manual (Page 27)

Using the TIMER
0
menu
TIMER
DAYLIGHT SAVING: NO
CURRENT TIME SET
ON/OFF TIMER
IS!| CHANNEL BLOCK
iSsI DMENU
^ ___ AM
Move (Hi) Select CS Exit®
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 19.
To select the TIMER 0 menu:
Display Highlight Select
MENU
O HCE))
To cancel the ON/OFF TIMER
function
Press RESET while the ON/OFF TIMER
menu is displayed.
Tip
Set DAYLIGHT SAVING time before setting the clock.
DAYLIGHT
SAVING
Automatically adjusts
the time
CURRENT
TIME SET
Necessary for the ON/
OFF TIMER
ON/OFF TIMER
Waks up or scheduled
viewing
CHANNEL
BLOCK
Prevent access
to certain channels
Spring: Select YES to compensate for Daylight Saving Time.
The current time moves one hour ahead.
Fall: Select NO at the end of Daylight Saving Time.
The current time moves back one hour. ,
With the CURRENT TIME SET menu open:
1
Press GD.
2 Press ♦ or ♦ until the current day is displayed.
Press GD to select.
3 Press 4 or ♦ until the current hour and AM/PM is
displayed. Press GD to select
4 Press 4 or 4 until the current minute is displayed, press
The clock is set. Press MENU to exit.
Any ioss .of power wili cause these settings to be erased.
CURRENT TIME SET
►___ -_:_-AM
DMENU
MoveSE Selectm Exit®
With the ON/OFF TIMER menu open:
1
Choose the ON/OFF TIMER you would like to set and
press GD.
2 Press 4 or ♦ until the desired day or range of days is
displayed. Press GD to select
3 Indicate the time that you want the TV to turn on
(hour, then minutes) by pressing
4 or 4 and then C3D.
4 Set the time duration (maximum of 6 hours) by pressing 4 or 4 and then QD.
5 Press 4 or 4 until you reach the desired channel. Press GT to select.
The ON/OFF TIMER is now set. Press MENU to exit.
When you perform AUTO PROGRAM, alt ON/OFF TIMER settings will be erased.
ON/OFF TIMER
► 1________
AM _h CH____
2
____
- - - - AM _h CH_______
DMENU
Select a position
SUN 12:00 AM
MoveSE Select .T1 Exit E3
You will be able to block two channels for a period of up to 12 hours.
FOLLOW STEPS 1-5 OF ON/OFF TIMER ABOVE
To erase your CHANNEL BLOCK settings, press RESET
while in the CHANNEL BLOCK window. Performing AUTO
PROGRAM will erase your CHANNEL BLOCK settings.
CHANNEL BLOCK
► 1___
AM__ h CH_.
2._
----- AM__h CH________
DMENU
Select a position
SUN 12:(X)AM
MovelSE Selects Exit®
23