Using the audio i menu, To select the audio s menu, To restore the factory audio settings – Sony KV-32FV1 User Manual
Page 26: Using the audio «t menu, Using your menus (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your Menus (continued)
Using the AUDIO i menu
©
fCgl
AUDIO
TREBLE
BASS
BALANCE
EFFECT: OFF
MTS; STEREO
SPEAKER : ON
AUDIO OUT . VARIABLE
DMENU
Move (Effl Select Exit ®
}
Adjustment
bars
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 19.
To select the AUDIO
S menu:
Display
Highlight
J'
Select
To restore the factory AUDIO
settings
Press RESET while the AUDIO menu is
displayed.
Tips 'ij''
• Press to cycle through your audio EFFECT
options.
• Press MTS on your remote control to cycle through
the MTS options.
22
TREBLE
Adjust left or right to decrease or increase higher pitched sound.
BASS
Adjust left or right to decrease or increase low pitched sounds.
BALANCE
Adjust left or right to emphasize left and right speaker volume.
EFFECT
Enhanced audio
options
Press
4
or ♦ to cycle through the following audio effects:
SIMULATED: Adds a surround-like effect to mono programs.
SRS: Produces a dynamic three dimensional sound for stereo signals.
AUTO SRS: Automatically detects whether a stereo or mono signal is being
received and switches the TV effect between SRS and SIMULATED.
OFF: Normal stereo or mono reception.
MTS
Enjoy stereo,
bilingual and mono
programs
MTS: Press
4
or ♦ to select one of the following options:
MONO: Select to reduce noise during stereo broadcasts for areas of weak
reception.
SAP: Select to listen to bilingual broadcast. (Non-SAP programs will be muted
when this feature is selected)
STEREO: Select when viewing a broadcast in stereo.
SPEAKER
Custom selection
of audio output
source
ON: Select to listen to the sound from the TV speakers with or without a
separate stereo system.
OFF: Select to turn off the TV speakers and listen to the TV's sound only through
external audio system speakers.
AUDIO OUT
Use to control the
TV's volume through
a stereo
AUDIO OUT can only be set when SPEAKER is set to OFF.
VARIABLE: Sound output varies according to the TV settings.
Useful when you want to use your TV's remote control to adjust the output of a
separate audio system.
FIXED: Sound output is held at a fixed level through your stereo.
Use your A/V receiver's remote control to adjust the volume.