ClearOne MAX IP Response Point - Manual (Page 6)

2 technical services: 800-283-5936
and set up your phone using the Configure phone wizard in the response point administrator’s guide.
ThE LCd dISPLAy
the lCd display acts as a legend for the various modes, codes and functions of the device. each function is cov-
ered in this manual or the administrator’s guide.
USINg ThE PhONE
Make a Call
press the 1. key to activate the phone. you will hear a chime or spoken prompt.
speaking clearly, say the name of the person in your Contact list you wish to call. 2.
Or
press the 1. key to activate the phone. you will hear a dial tone.
dial the number as you would on a standard phone. the number appears on the lCd screen. 2.
you can also pre-dial the number while in standby mode and press the key to connect the call.
to add a pause to the number you are pre-dialing, press and hold the pound (#) key.
Answer a Call
when there is an incoming call, the following will occur: •
the phone will ring (unless the ringer is turned off). 1.
the phone’s 3 leds will flash. 2.
the phone icon on the lCd screen will flash. 3.
to answer • press the key.
End a Call
press the key.
Turn the Ringer On/Off
press and hold the “*” key until the ringer Off icon appears on the lCd display.
Adjust Ringer Volume
while the phone is ringing, press 1. or .
while the phone is inactive, press 2. or . the ringer melody will play once at the new level.