Scilogex MS7-H550-Pro - Manual (Page 6)

4
Digital 7” Square(Hotplate)Magnetic Stirrer
• The tip of the measuring sensor must be at least 5 mm
from vessel bottom; a distance of 10 mm is ideal.
• The instrument can only be disconnected from the main
power supply by pulling out the main or the connector
plug.
• The voltage stated on the label must correspond to the
main power supply.
• Ensure that the main power supply cable does not touch
the hotplate. Do not cover the device.
• The instrument may only be opened by experts.
• Keep away from high magnetic field.
2.Proper use
The instrument is designed for mixing and/or heating liquids
in schools, laboratories or factories.
• Observe the minimum distances between the devices,
between the device and the wall and above the assembly
(min. 100 mm).
Figure 1
This device is not suitable for using in residential areas or
other constraints mentioned in Chapter 1.