Scilogex MS7-H550-Pro - Manual (Page 12)

10
Digital 7” Square(Hotplate)Magnetic Stirrer
Figure 6
7.3 Setting the safety temperature
The safety temperature can be set as follows:
• Adjust the temperature setting key to set the safety
temperature.
8.Function: Stirring
The function“stirring”is switched on or off via rotating
stirring knob. The speed is set on the knob (100 to 1500 rpm
in steps of 10 rpm ).
When both of function heating and stirring are switched on
and those above operations are done, the LCD will shift to
the speed value and come back to the temperature value in
about 5 seconds.
9. Remote control
Figure 7