Roadi RDT40 - Manual (Page 17)

OWNER S MANUAL
,
OBD2 CODE READER
17
Menu:
4. VIN
EVAP--Evaporative System Monitor
HO2S--O2 Sensor Heater Monitor
2AIR-- Secondary Air Monitor
HCM--Heated Catalyst Monitor
A/C--A/C system Monitor
3) Press the
ENTER button to return to the main Menu.
4.4 Viewing VIN Number
The View VIN function allows you to view the Vehicle Identification No. on
2002 and newer vehicles that support Mode 9.
1) Select 4. VIN”from the main menu by pressing the ENTER button.
If the Scan Tool is not connected yet, then refer to
"Reading
Codes"”from 1 to 6. at Paragraph 4.1.
2). Use the
SCROLL button to view additional digits of the 17-digit string.
" "-- A flashing Rig ht Arrow Indicating additional digits of VIN string
are available on the next screen.
" "-- A flashing Left Arrow Indicating additional digits of VIN string
are available on the previous screen.
3) Press the
ENTER button to return to the main Menu.
4.5 Rescanning Data
The RESCAN function allows you to retrieve the most current data stored
in the ECM or to re-link to the vehicle.
if communication is disconnected.
1) Select " 5. RESCAN" from the main menu by pressing the ENTER
button.