Roadi RDT40 - Manual (Page 15)

OWNER S MANUAL
,
OBD2 CODE READER
15
ERASE
DONE!
ERASE
FAIL!
ERASE?
YES NO
3) If you do not want to proceed with erasing the codes, press the
SCROLL button to exit.
4) If you do wish to proceed to erase the codes, then press the
ENTER
button.
5) If the codes are cleared successfully, an "ERASE DONE!"”message
will show on the display. Press the
ENTER button to Return to the main
Menu list.
6) If the codes are not cleared, then an
"ERASE FAIL!" message will
appear. Press the
ENTER button to Return to the main Menu list.
HOT KEY: Pressing and Holding the SCROLL button for about 3
seconds will allow you to more quickly erase the DTCs than throug h the
main menu.
4.3 RETRIEVING I/M READINESS STATUS:
Important: I/M Readiness function is used to check the operations of the
Emission System on OBD2 compliant vehicles. It is an excellent function to
use prior to having a vehicle inspected for compliance to a state emissions
program. An I/M Readiness Status result of "NO" does not necessarily
indicate that the vehicle being tested will fail the state I/M inspection. For
2) A message of
"ERASE? YES NO"”comes up asking for your
confirmation.