Reizen RE-40 Amplified Telephone - Manual (Page 9)

9
TELEPHONE OPERATION
Placing a Call on Hold
1. Press the HOLD Button (figure 7). Your caller will be placed on
hold with gentle, computer-generated music.
2. To resume your call, press HOLD again.
3. You can also use the HOLD function to switch to another extension on the same
telephone line. Simply place the unit on hold, pick up the other telephone, and press the
HOLD button to release the call to the second extension.
Using the Speakerphone
1. Press the SPEAKERPHONE button (figure 8) to either dial out
for a call or answer a call.
2. To hang up in either case, press the button again.
Note: You can switch between Handset and Speakerphone during conversation:
1. Press the SPEAKERPHONE button, while conversing using Handset.
2. Replace the Handset on the base. While the unit is operating in this mode, the
Speakerphone indicator comes on.
3. Switch back to the Handset at any time simply by lifting it from the base.
Missed Calls & Voice-Mail Waiting Indicators
Missed calls as well as voice-mail waiting are indicated by the red flasher panel at the
front of the phone. The left one-third of the flasher will blink to alert you that you missed
an incoming call or that you have voice-mail messages waiting.
Note: Voice-Mail is an optional service. Please check with your local phone company for
more details.
Extension-in-Use Indicator
The middle third of the flasher panel will light up to alert you that another extension of the
same telephone line is being used.
Figure 7
Figure 8