Reizen RE-40 Amplified Telephone - Manual (Page 12)

12
AMPLIFICATION FEATURES
Incoming Voice Volume
1. Adjust the volume of incoming calls simply by sliding the
VOL control (figure 14) at the lower right of the unit. This will
provide volume of up to 18 db.
2. For greater amplification up to 40 db, press AMPLIFY button
(figure 15) to turn the incoming voice amplifier on. You will see
an amplification icon and the Amplify LED appear.
3. Adjust the volume in your earpiece by moving the VOL slide control.
4. In standard use, the amplifier turns off when you hang up.
NOTE: If you want amplifier to remain on continuously, slide the switch on the
underside of the unit to AUTO.
Incoming Voice Tone
Your unit allows you to adjust the tone of incoming sound to
enhance its clarity and help you distinguish between similar-
sounding words.
1. To identify the tone that best suits your hearing on calls, first press AMPLIFY.
2. Adjust the TONE slide control (figure 16) at the unit’s lower left.
T-Coil Compatible Handset
To eliminate the dissonance of ordinary telephones, your Reizen Amplified Telephone
is expressly designed for T-Coil compatibility. The handset incorporates special
elements that complement your T-Coil for maximum sound clarity.
Audio-Out Jack
Your unit allows you to transport your phone conversation to a
neckloop, headset or other assistive-listening device via a 3.5
MM audio jack (figure 17). Simply plug in the jack at the back
of unit and use telephone as you normally would.
Figure 15
Figure 17
Figure 16
Figure 14