Rega Aria - Manual (Page 7)

FRONT PANEL INDICATORS
Powering Up
The Aria is activated by pressing the On/Off button situated to the left of the control
panel. The REGA logo indicator below it will glow RED. It is recommended to activate
the Aria before the power amplifiers and deactivate after they have been switched
off.
NB. The unit will be in MUTE for approximately 5 seconds when powered-up or
switching between inputs. MM or MC inputs are selected by pressing the input
button on the front panel. The LED indicator will show the selected input. When
switching between MM & MC the Aria goes into mute briefly to avoid any intrusive
switching noise whilst the circuitry settles. When switching between MC and MM both
LED’s will temporarily light, with a short delay in the audible ‘click’ of the relay. This is
a function of the mute and relay contact cleaning / activation circuit and is normal.
4