Setting up and positioning your rp10 turntable – Rega RP10 User Manual
Page 11
8
Ceramic Platter
Drive Belts
Drive Pulley
Top Brace
Balance Weight
Tracking
Force
Control
Bias Adjustment
SETTING UP AND POSITIONING YOUR RP10 TURNTABLE.
Always take great care when unpacking the turntable. Extra care must be taken if your RP10 is
supplied with a cartridge factory fitted so as not to damage the stylus. Place the turntable on a
sound and level surface.
The RP10 inner plinth sits within the outer frame, locates and self centralises via three rubber
triangulated ‘o’ rings. Ensure correct alignment and check that the tonearm phono lead assembly
and motor lead are clear of the feet and are not contacting the plinth.
RP10 English Manual Text_Apollo English manual.qxd 17/12/2013 15:28 Page 10