beautypg.com

W 2 0 1 2 p, 4sd card mobile dvr user manual 4 – RearviewSafety RVS-MDVR User Manual

Page 6

background image

W 2 0 1 2 P

47

162

80

180

5

138

CHAPTER 2 : INTERFACE AND DESCRIPTION OF THE FUNCTIONS

2.1 MDVR OUT-DESIGN AND DIMENSION

Figure 2-1

Figure2-3

Function type MDVR dimension and installation hole site (double SD card
machine), as shown in Figure 2-1

Unit

mm

Panel Indicator Light
Description
V-OUT

Video OUT

SD1/SD2:

Recording SD card

indicator light ,Light will be on

when the SD card exists.
REC:

Light will be on when

recording
GPS:

Light will be on when the

GPS module exists
POWER:

Light will be on when the

power supply can work normally
ALM:

Light will be on when the

machine is in abnormal situation
WIFI:

Light will be on when the

WIFI is ON
2G/3G:

Light will be on when 3G

communication module exists
IR :

Infrared sensor receiving

remote control signal

See Figure 2-2 : put the back of the SD card upside,insert it into

the SD card slot ,then pull on the card slot

LOCK : It can be power on normally only when the electricity is

locked to the LOCK gear. Open the electronic lock in working

period, the system will upload the SD card , delay power off

according to the menu setting.

SD-1

SD-2

Figure 2-2

Push the card s protection cap
towards right after unlocked

128

5

162

47

80

138

Figure 2-4

Simple type MDVR size and installation hole site

(single/double SD card) as shown in Figure 2-4

Panel Indicator Light Description :
SD1/SD2:

Light will be on When the SD

card exists.
REC

:Light will be on when recording

GPS

:Light will be on when the GPS

module exists.
POWER

:Light will be on when the

power supply can work normally
ALM

:Light will be on when the machine

is in abnormal situation
IR

:Infrared sensor receiving remote

control signal

Figure 2-5

Figure 2-6

Figure 2-7

Use key to open the LOCK gear, open the SD card protection cover, as Figure

2-5 , then put the back of the

SD card upside , insert it to the SD card slot , press it into the right place. As Figure

2-6 , finnally , cover the

chassis.
LOCK

:It can be powered on normally only when the electricity is locked to the LOCK gear. In working period ,

open the electronic lock , the system will upload the SD card , delay power off according to the menu setting.

Unit

mm

4

SD Card Mobile DVR User Manual

4