RearviewSafety RVS-MDVR - Manual (Page 19)

W 2 0 1 2 P
Upgrade
Select Configure and press ENTER , enter into motion detection configurationinterface.
(Figure 3-30).
Step1 : Select the first Box , press Enter gets yellow , after move the arrow keys ,gets dark green )
Step2 : The select second box, the diagonals of the rectangle between these two boxes is the
selected area, ( after selected ENTER the diagonal region gets into a dark green .)
Step3 :, press Return to last interface and then save. Sensitivity divided into Low ,medium and
high grade, under high-sensitivity mode, it is capable of sensing changes in light and under low
sensitivity status , only can detecting the moving objects .
" " " "
" "
" "
" "
Figure 3-30
Figure 3-31
PROCEDURES OF SETTING DETECTION AREAS:
No effect on this menu , the procedures are as bellowing :
Step1:
Copy upgrading file HI3512-wkpmdvr.crc into SD CARDS CATALOGUE .
Step2:
Insert SD card into SD1 slot , turn on Demo and then enter into Upgrading
Step3:
Enter into the system after upgrading successfully ,Press Key F1 on the remote control to
view the system version information
" "
" "
3.6-4:SYSTEM UPGRADE
17
SD Card Mobile DVR User Manual
17
" " "C "
Enter and ancel can delete the selected areas , all the parameters set must
confirm save after configuration, if is successful modified there will prompted
save success.
Do not shut power or pull out USB during the device is upgrading , otherwise it will
break the system device.